Digital Concrete 2024 - Supplementary Proceedings

Content

• The Effect of Coarse/Fine Aggregate Ratios on the Properties of Additively Constructed Concrete

  Foiles, Dreycen; Negron-McFarlane, Christian; Kreiger, Eric; Kreiger, Megan

• Ternary Gypsum-Cement-Pozzolan Composites for 3D Printing with Reduced Environmental Impact

  Sahmenko, Genadijs; Sinka, Maris; Bumanis, Girts; Sapata, Alise; Puzule, Liga; Slosbergs, Peteris; Bajare, Diana

• Tailored low carbon footprint cementitious material for 3D printing : Strategies for rheology adjustment and mechanical performance estimation

  De Bono, Victor; Ducoulombier, Nicolas; Mesnil, Romain; Caron, Jean-François

• Low clinker ECC materials using biomass ash for 3D printing

  Asensio, E.; Fenàndez, F.; Cabello, Z.; Álvarez, O.; Guerrero, A.

• Influence of Illitic Calcined Clay on Properties of Mixtures for 3D Concrete Printing

  Joon, Hillar; Petrimägi, Lauri

• Implementing the excess paste concept for a systematic mix design of printable concrete

  Hanžič, Lucija; Šter, Katarina; Štefančič, Mateja

• Fine Recycled Concrete Aggregates in 3D Printed Concrete

  Sikora, Pawel; Federowicz, Karol; Techman, Mateusz; Skibicki, Szymon

• Exploring Low-Carbon Cementitious Materials for 3D Printing Applications : A Comparison Between Limestone Calcined Clay Cement (LC3) And One-Part Alkai-Activated Material (AAM)

  Al-Noaimat, Yazeed A.; Ghaffar, Seyed Hamidreza

• Exploring Locust Bean Gum as a Robust Binder and Rheology Modifier for Earth Concrete

  Maierdan, Yierfan; Armistead, Samuel J.; Mikofsky, Rebecca A.; Carcassi, Olga Beatrice; Ben-Alon, Lola; Srubar, Wil V. III.; Kawashima, Shiho

• Effect of expanded perlite on the properties of 3DCP mixtures

  Barbosa, Marcella; Anjos, Marcos; Maia, José Vinícius; Camões, Aires; Cruz, Paulo

• Development of low-cement lightweight concrete mixes for 3D extrusion printing

  Obermeier, Nico; Brunner, Kim; Wiese, Felix; Stengel, Thorsten

• Development of 3D Printable Cement-Based Composite Containing Oil Shale Ash

  Sapata, Alise; Sinka, Maris; Sahmenko, Genadijs; Bajare, Diana; Migliniece, Baiba; Hanzic, Lucija; Štefančič, Mateja

• Challenges in Enhancing Workability and Printability for 3D-Printable Geopolymer Mortar

  Khokher, Shawn; Sanguinetti, Paola; O’Reilly, Matthew

• Analysis of the Effect of Substituting Cement With Marble Powder on the Mortar Characteristics Used in 3D Printing

  Zargayouna, Habib; Paquet, Elodie; Mabrouki, Tarek; Hamdi, Essaieb; Furet, Benoit

• A hybrid binder concept for a swift liquid-to-solid transition in 3D printing of suspensions

  Remke, Sebastian; Kandy, Sharu Bhagavathi; Sant, Gaurav; Gädt, Torben

• Reusable Flexible Formworks for Constructing Complex Concrete Structures

  Kariouh, Anass; Popescu, Mariana

• One-part and two-part alkali-activation of iron mining tailings for sustainable 3D concrete printing mixes

  Rodrigues e Silva, Rafaela de Kássia; Araujo de Souza, Eduarda; Ribeiro Borges, Paulo Henrique

• Multi-objective optimization of a sustainable ternary mortar for 3D printing

  Jin, Willy; Ouellet-Plamondon, Claudiane; Caron, Jean-François

• Mechano-chemically activated local clays as sustainable binder replacement for 3D concrete mixtures

  van Hierden, N. Z.; Yu, Q.; Brouwers, H. J. H.

• Environmental benefits of concrete floor slabs produced with digitally fabricated formworks – a case study

  Ammann, Rebecca; Gebhard, Lukas; Thoma, Karel; Mata-Falcón, Jaime; Kaufmann, Walter

• Embedding NFC Tags Into 3DCP Elements

  Hernández Vargas, José; Dervishaj, Arlind

• Decarbonizing Concrete Construction : Case of the Phoenix 3D Printed Footbridge and Learnings for Engineering and Architecture.

  Nana, W Serge Auguste; Dell'Endice, Alessandro; Bhooshan, Vishu; Zhou, Fulei; Alachek, Ibrahim; Ouedraogo, Jeremy; Renault de la Mothe, Loïc; Megens, Johannes; Sanin, Sandro; Bhooshan, Shajay; Charrier, Andrea; Jacquemet, Karine; Van Mele, Tom; Block, Philippe; Lombois-Burger, Hélène

• Circular Design Strategies for 3D Concrete Printing in the Built Environment

  Gümrük, I.; Wolfs, R. J. M.; Schröder, T. W. A.; Salet, T. A. M.

• Anisotropic Characteristics of 3D-Printed Geopolymer Mortars from End-of-Life Materials of Construction Industry

  Kul, Anıl; Kocaer, Öznur; Lucas, Sandra S.

• Advancements in sustainability of 3D concrete printing : Presenting low-carbon mixtures for additively manufactured concrete structures in practice

  Colyn, ML; Babafemi, AJ; van Zijl, GPAG

• A Review of Developments in Low Carbon 3D Printed Concrete in Europe: Steps Towards Sustainable Construction

  Khan, Mehran; McNally, Ciaran

• A Framework for Crafting Sustainable Lightweight Concrete in Additive Manufacturing

  Rangel, Carolina M.; Salet, Theo A. M.; Lucas, Sandra S.

• A digital library for using mine tailings in low-carbon concrete replacements for mine back-filling & 3D printing

  Corfe, Ian

• 3D printable mortars with different recycled concrete powders as fillers

  Canavarro Cavalcante, Tiago; Castrillon Fernandez, Letitia Ikeda; Toledo Filho, Romildo Dias; Mendoza Reales, Oscar Aurelio

• 3D Concrete printing and circularity : designing, testing, and modelling dry joints for structural applications.

  Wolfs, Rob; Gümrük, Idil; Driessen, Saar; Ferguson, Matthew; Yu, Rong; Suiker, Akke; Salet, Theo

• Production of high-precision formwork elements using parametrically programmed concrete extrusion and machining

  Abstoss, Marvin; Funke, Henrik; Gelbrich, Sandra

• Optimization Shape Stability for Printed Precast Column Using Matric Suction Effect

  Park, Gwang Min; Kim, Jae Hong

• Navigating the Digital Chain in Concrete 3D Printing

  El Hage, Ali; Paquet, Elodie; Leklou, Nordine; Neu, Thibault; Poullain, Philippe

• Large-scale Monolithic Printing with Ready-Mixed Concrete : Challenges and Solutions

  Will, Frank; Storch, Florian; Plaschnick, Paul; Taubert, Markus; Butler, Marko; Mechtcherine, Viktor

• Investigation of digitally produced, interlocking concrete blocks for a modular slab construction

  Neef, Tobias; Goertzen, Tom; Niemeyer, Alice C.; Mechtcherine, Viktor

• Improving Thermal Insulation Performance of 3D Printed Concrete Wall

  Liu, Ruiqing; Du, Hongjian

• Hybrid Approaches Towards 3D Concrete Printing for Lightweight Reinforced Concrete Structures

  Meibodi, Mania Aghaei; Lin, Yuxin; Chen, Hao

• Efficient production of reinforced precast concrete elements using additive manufactured, integrated formwork

  Rudolph, Enrico; Schönfelder, Daniel; Funke, Henrik; Gelbrich, Sandra

• Effect of the printing process on thermal performance of 3D-printed structures

  Sovetova, Meruyert; Calautit, John Kaiser

• Creating vascular self-healing concrete using direct ink writing

  Wan, Zhi; Xu, Yading; Šavija, Branko

• A New Approach for Automated Design and Robot-Assisted Production of Structurally Optimised Reusable Concrete Building Elements

  Kromoser, Benjamin; Gappmaier, Peter; Ahmed, Iyad; Reichenbach, Sara

• 3D Printing Strategy and Implementation for Concrete Prefabrication Industry in Sweden

  Chaudhari, Ojas; Johansson, Jan; Haage, Mathias; Sjölander, Andreas Sven; Larsson, Robert; Yilmaz, Ipek; Suchorzewski, Jan

• 3D Light on Site – Bringing Concrete Print to the Construction Site

  Lehr, Leonard R.; Pfeiffer, Sven; Rasanani, Mahdieh; Stephan, Dietmar; Rasehorn, Inken Jette; Weiss, Jannik

• Zone-based analysis of layer deformation in 3D concrete printing : shoulder, steady-state, and foot zones

  de Miranda, Luiza R. M.; Lesage, Karel; De Schutter, Geert; Roussel, Nicolas

• Structuration Rate Measurement Using a Digital Pocket Vane

  Demont, Léo; Mesnil, Romain; Caron, Jean-François

• Real-time monitoring and feedback operation system for 3D-printed concrete based on computer vision

  Zhang, Hanghua; Hao, Lucen; Zhang, Shipeng; Xiao, Jianzhuang; Poon, Chi-Sun

• Optimization of Fast Penetration Tests for Rheology Control in 3D Printing Concrete

  Caneda-Martínez, L.; Hassan, M.; Demont, L.; Keita, E.; Belin, P.; de Bono, V.; Mesnil, R.; Caron, J. F.; Roussel, N.

• Nozzle-Integrated Slump Scanner Test : Development of an Automated Shape Stability and Instantaneous Yield Stress Measurement Method for the Set-on-demand 3D Concrete Printing

  Rehmann, Atta Ur; Kang, Seungwoo; Kim, Jung-Hoon

• Non-destructive evaluation for the unbonded interlayer of 3D printed concrete

  Bang, Jin Soo; Yim, Hong Jae

• Investigations on Multi-Sensor Data for Monitoring Volume Flow During the Printing Process

  Schönsee, Eric; Jeyifous, Olubunmi Anthony; Strangfeld, Christoph; Hüsken, Götz

• Improving a 3D Concrete Printing Factory Using Stochastic Modelling for Decision-Support

  Walzer, Alexander N.; Kozlova, Mariia; Mohite, Ashish; Yeomans, Julian S.

• Filament Extraction for 3D Printing

  Mawas, Karam; Maboudi, Mehdi; Achanccaray, Pedro; Gerke, Markus

• Exploring the Impact of the Pumping Process on the Structural Build-up in the Context of 3D Concrete Printing

  Rehmann, Atta Ur; Kim, Ik-Gyeom; Kim, Jung-Hoon

• Development of a Tool for generating a constant Volume Flow with Peristaltic Pumps for robot-controlled Concrete Extrusion

  Lindner, Marco; Gliniorz, Ralf; Funke, Henrik; Gelbrich, Sandra

• Developing a Computer Vision Application for Crack Detection

  Bier, H.; Hidding, A.; Lewandowska, J.; Calabrese, G.

• Characterization of 3D Concrete Printed Horizontal Structures through Early-Age Deformation Analysis

  Szögi, Tamás; Kapitány, Kristóf; Sólyom, Sándor

• Case Study on the Use of Thermographic Analysis to Evaluate an Additively Constructed Building

  Diggs-McGee, Brandy; Kreiger, Megan; Kreiger, Eric; Negron-McFarlane, Christian

• An assessment of the repeatability of 3D printed concrete structures

  Hüsken, Götz; Jeyifous, Olubunmi Anthony; Schönsee, Eric; Strangfeld, Christoph

• A Data-Driven View on Digital Fabrication with Concrete : The Case of Interlayer Bond Strength

  Versteege, J.; Wolfs, R. J. M.; Salet, T. A. M.

• Toward the optimal use of local cementitious materials through novel admixture technology and a dedicated 2K printing system

  Farra, Ramzi; Mazanec, Oliver; Ducoulombier, Nicolas; Mallet, Alban

• Stability Prediction of 3D Printable Fresh Construction Materials by Analyzing Thixotropic Compressive Properties Using Extensional Dynamic Mechanical Analysis

  Jacquet, Yohan; Maierdan, Yierfan; Kawashima, Shiho; Perrot, Arnaud

• Rheology and printability of cement paste modified with filler from manufactured sand

  Haghighat, Negin; Mollah, Md. Tusher; Sannerud, Stian Y.; Boyer, Julie; Spangenberg, John; Jacobsen, Stefan

• Rheological Modifiers in Optimizing Quick Nozzle Mixing Technology for 3D Concrete Printing

  Zhang, Nan; Sanjayan, Jay

• Rheological Characterization of Nanomodified Ultra-High-Performance Concrete for 3D Printing

  Ahmed, Ayesha; Rosa, Raul Marrero; Gomaa, Shady; Irizarry, Elmer M.; Troemner, Matthew; Cusatis, Gianluca

• Rheological and 3D printing assessment of sisal fiber mortar for architectural applications

  Varela, Hugo; Pimentel Tinoco, Matheus; Mendoza Reales, Oscar Aurelio; Toldeo Filho, Romildo Dias; Barluenga, Gonzalo

• Open time and extrudability performance analysis of 3D printed concrete with recycled concrete fine aggregates using rheological and computer vision techniques

  Haripan, Vislavath; Senthilnathan, Shanmugaraj; Gettu, Ravindra; Santhanam, Manu; Raphael, Benny

• Influence of temperature variations on the performance of two-component 3D printable mixtures

  Mohan, Manu K.; Tao, Yaxin; De Schutter, Geert; Van Tittelboom, Kim

• Improvement of Rheological Properties and Printability of Sodium-Carbonate Activated Slag-Based Systems

  Ertuğrul, Onur; Özen, Ömer Can; Oktay, Didem; Yazar, Tugrul; Akturk, Busra

• How Can Nanocellulose Contribute to Enhance the Performance of Concrete 3D Printing?

  Aouichat, Belkis Selma; Hosseinpoor, Masoud; Yahia, Ammar; Dupuis, Mario

• Extended rheological characterization as a tool for low-binder 3D-printing compositions

  de Oliveira Romano, Roberto Cesar; Nunes de Lima, Francisco Jordão; Sales de Mesquita, José Augusto Ferreira; Pan, Eduardo Maia; Pileggi, Rafael Giuliano

• Enhancing 3D Printability of Metakaolin-Based Geopolymers for Nuclear Waste Filtration Applications

  Lacambra-Andreu, Xavier; Scheel, Mario; Poulesquen, Arnaud

• Effects of Time-Dependent Rheological Properties of Cementitious Materials on the Print Quality of Extrusion-Based 3D Printing

  Jiang, Yu; Al-Tabbaa, Abir; Daly, Ronan

• Effect of the ambient temperature on the structural build-up of 3D printed concrete – experimental and modelling study

  Mezhov, Alexander; Robens-Radermacher, Annika; Unger, Jörg F.; Schmidt, Wolfram

• Development of set-on-demand 3D printable limestone-calcined clay-based cementitious materials using desalination brine

  Chen, Yu; Zhang, Yamei; Schlangen, Erik; Çopuroğlu, Oğuzhan

• Determination of Optimal Flowability of 3D Printing Concrete Based on Multi-objective Optimization Method

  Song, Xinlei; Sun, Xiaoyan; Wang, Hailong

• Comparison of Rotational Rheometers for Ready-Mix Concrete

  Muthukrishnan, Shravan; Feys, Dimitri; Mikhalev, Daniil; Baumert, Christian; Kluwe, Moritz Niklas; Link, Julian; Mezhov, Alexander; Nicia, David; Pirharati, Mahmoud Eslami; Reissig, Silvia; Vogel, Christian; Haist, Michael; Mechtcherine, Viktor

• Bio-Based Additives to Improve the Rheology of High-Volume Fly Ash Cement-Based Mortar for 3D-Printing

  Sadeghzadeh Benam, Shaghayegh; Sandalci, Ilgin; Basaran Bundur, Zeynep; Bebek, Ozkan

• Assessment of Printability of Concrete based on Packing of Aggregates

  Paritala, Spandana; Singh, Prashant R.; Kamakshi, Tippabhotla A.; Subramaniam, K. V. L.

• 3D Printing Architectural Applications of cement-lime mortars with microencapsulated Phase Change Materials (PCM)

  Márquez, Álvaro; Ramallo, Laura; Varela, Hugo; Barluenga, Gonzalo; Puentes, Javier

• X-Ray Tomography Insights into Early Drying Effects in 3D Concrete Printing

  Keita, E.; Zuo, Wenqiang; Caneda-Martínez, L.; Aimedieu, P.; Bornert, M.; Roussel, N.

• Shrinkage characterization and compensation for 3DPC

  Viano, Rafaël; Margerit, Pierre; Mesnil, Romain; Weisz-Patrault, Daniel; Caron, Jean-François

• Investigations into the dynamics of penetration tests in digital fabrication

  Hechtl, C. Maximilian; Kränkel, Thomas; Gehlen, Christoph

• Influence of Printing Parameters on Early-age Shrinkage in 3D Printed Mortar

  Harbouz, Ilhame; Alam, Syed Yasir; Loukili, Ahmed

• Experimental set-up for shear and interlayer bonding in a 3D printed concrete framework

  Soave, Francesco; Muciaccia, Giovanni; Ferrara, Liberato

• Environmental Conditions Affecting the Shrinkage Behavior of Low Clinker 3D Printable Mortar

  Palomba, Martina; Esposito, Laura; Villani, Chiara; Wagner, Eckhard

• Enhancing Early Strength in LC3 3DCP with Advanced Chemical Admixtures

  Farra, Ramzi; Dhers, Sébastien; Leal da Silva, Wilson R.

• Early-age Shrinkage Measurement in 3D Printed Con-crete by Digital Image Correlation – Influence of Spray Paints

  Kurup, Divya S.; Rahul, A. V.

• Developing Binders with Ceramic Waste for 3DCP Mixes

  de Matos, Paulo R.; Schackow, Adilson; Safanelli, Nicollas; Zat, Tuani; Rodríguez, Erich D.

• Determination of Print Speed Based on The Fresh Mechanical Strength Over Time of Additively Constructed Concrete by Unconfined Compression

  Negron-McFarlane, Christian; Kreiger, Eric; Kreiger, Megan

• The Effect of Printing Path on the Shear Behavior of 3D Printed Concrete Panels Under Diagonal Compression Test

  Mudadu, Antonio; Giulivo, Marco; Menna, Costantino

• Structural behavior of 3D printed load bearing elements

  Baz, Bilal A.; Nana, W Serge Auguste; Regnault de la Mothe, Loïc; Florentin, Jérôme; Ouedraogo, Kouka Amed Jeremy; Cardia, Gianluca; Ugwu, Chikaeze; Werzinger, Matthias; Meyer-Brötz, Fabian; Bennani, Abdelkrim; Lombois-Burger, Hélène

• Prediction of the flexural strength of 3D printed SHCC beams based on a stochastic size-dependent model

  Yu, Jie; Weng, Yiwei; Teng, Fei; Ye, Junhong; Yu, Kequan; Yu, Jian-tao

• Non-linear behaviour under compression of hardened 3D-printed concrete

  Bharti, Mrityunjay; Menon, Arun; Santhanam, Manu

• Mechanical properties of 3D printable responsive cement mortar after magnetic intervention

  Zhan, Yiyuan; Lesage, Karel; De Schutter, Geert

• Mechanical Characterization of 3D Printed Ultra High-Performance Concrete

  Irizarry, Elmer M.; Gomaa, Shady; Rosa, Raul Marrero; Ahmed, Ayesha; Troemner, Matthew; Lale, Erol; Yu, Ke; Cusatis, Gianluca

• Influence of Nozzle Diameter on the Anisotropy of Compressive Strength – Measured on 3D Printing Concrete Designed with Recycled Fine Aggregates

  Muy, Yeakleang; Courard, Luc; Bulteel, David; Rémond, Sébastien; Taleb, Maria; El Cheikh, Khadija; Hubert, Julien

• Influence of Coarse Aggregates on the Performance of 3D Printing Concrete

  Shen, Wenbin; Wang, Hailong; Sun, Xiaoyan

• Experimental Behavior of a 3D Printed Concrete Wall with Fixed Base Anchorage Subjected to In-Plane Cyclic Loads

  Giulivo, Marco; Menna, Costantino; Capozzi, Vittorio; Asprone, Domenico

• Enhancing interlayer bond strength and flexural performance in 3D concrete printing with SHCC bonding agents

  Teng, Fei; Ye, Junhong; Yu, Jie; Li, Heng; Mechtcherine, Viktor; Weng, Yiwei

• Effect of the Geometry of Representative Volumetric Masonry Elements : Experimental and Numerical Analysis

  Soares dos Anjos, Marcos Alyssandro; Rodrigues Maia, José Vinícius; de Souza Dias, Leonardo; Medeiros, Fernanda Karolline de; de Barros Cavalcante, João Paulo; Farkat Diógenes, Hidelbrando José

• Effect of Printing Parameters on Print Quality and Fracture Propagation Behavior of 3D Printed Concrete

  Nakase, Kota; Hashimoto, Katsufumi; Sugiyama, Takafumi; Mori, Hiroaki; Kishira, Ryo; Oomori, Hiroto

• Development and holistic suitability assessment of 3D printable mortar

  Rasehorn, Inken Jette; Ehm, Clemens; Frohmüller, Max; Schaudienst, Falk; Lehr, Leonard; Stephan, Dietmar

• Composite concrete columns of 3DP concrete and self-compacting concrete subjected to normal force

  Silfwerbrand, Johan

• Comparative Study into the Interlayer Bond Strength of 3D Printed Mortar : Underwater vs. Air Environments

  Srinivas, Dodda; Panda, Biranchi; Sitharam, T. G.

• Blast Response of Additively Constructed Concrete

  Johnson, Carol F.; Jordan, Joseph; Kreiger, Eric; Kreiger, Megan

• Understanding carbonation in 3D printed cement-based materials with exposed bottom surface

  Zhang, Yi; Van Tittelboom, Kim; Tao, Yaxin; Zhang, Yiyuan; Jiang, Zhengwu; De Schutter, Geert

• Realization of a reinforced SPI façade : Direction-dependent material properties and durability assessment

  Weger, Daniel; Gartner, Benjamin; Rausch, Anne; Schießl-Pecka, Angelika; Gallmetzer, Andreas

• Quantification of Porosity and Sorptivity in Fiber-Reinforced 3D-Printed Mortar : Connecting Material Composition and Structural Performance

  Rider, B.; Kurtis, K. E.; Stewart, L. K.

• Improving durability performance of 3D printed concrete via topological interlocking of layers

  Mostert, Jean-Pierre; Kruger, Jacques

• Impact of Very Early Age Drying on Printed Concrete Microstructures

  Denis, L.; Omikrine-Metalssi, O.; Karam-Cabrerizo, R.; Barnes-Davin, L.; Keita, E.; Roussel, N.

• Topology-Optimization-Based Additive Construction for Sustainability

  Migliorino, Jenna; Ahmed, Aly Mohamed Aly; Mackin, Anthony; Hanoun, Zaid; Mantawy, Islam M.

• Thickness optimization of 3D-printed structures considering structural failure

  Mesnil, Romain; Sarkis Rosa, Pedro Paulo; Caron, Jean-François

• Stitching Engineered Cementitious Composites (ECC ) : Unraveling Anisotropy Challenges through Architectured 3D Printing Path Design

  Zhou, Wen; Xu, Yading; Šavija, Branko; McGee, Wes; Li, Victor C.

• Optimization Framework for Large-Scale Powder Bed 3D Printed Concrete Structures under Various Constraints

  Wolf, Christoph; Robens-Radermacher, Annika; Unger, Jörg F.

• Greenhouse Gases Emission Reduction Trough Topology Optimization and 3D Printing

  Alencar Oliveira, Francisco Hélio; Picelli Sanches, Renato; Barari, Ahmad; Oliveira Romano, Roberto Cesar de; Pileggi, Rafael Giuliano; Nelli Silva, Emílio Carlos; Sales Guerra Tsuzuki, Marcos de

• Free-form Structural Optimization for Additive Manufacturing in Construction

  Wüchner, Roland; Warnakulasuriya, Suneth; Asl, Reza Najian; Bletzinger, Kai-Uwe; D'Acunto, Pierluigi; Herding, Friedrich; Lowke, Dirk

• Automated Manufacturing Process and Structural Performance of Ribbed CRC Slabs

  Engel, Sven; Hegger, Josef; Classen, Martin

• A Digital Design Process for Bundling of Void Formers for Application in Functionally Graded Concrete

  Haufe, Carl N.; Castel, Paula; Strahm, Benedikt; Nigl, David; Clémenté, Jérôme; Roos, Florian; Blandini, Lucio

• The potential of natural fiber reinforcement in 3D printed concrete : a review

  Dias, J. Pedro; Brandão, Filipe; Figueiredo, Bruno; Cruz, Paulo J. S.

• Prototypical Realization of Fully Automated 3D-Printing of Reinforced Concrete Using AMoRC Method

  Zhang, Sisi; Claßen, Martin; Olesch, Mirco; Mäde, Konrad; Sharma, Rahul

• Mechanical performance of 3D Printed fiber reinforced concrete

  Nana, W. Serge Auguste; Baz, Bilal A.; Blachier, Christian; Peraud, Mickaël; Regnault de la Mothe, Loïc; Zhang, Qing; Lombois-Burger, Hélène

• Large scale 3D printing of a shell structure reinforced by the flow based pultrusion process

  De Bono, Victor; Demont, Léo; Ducoulombier, Nicolas; Mesnil, Romain; Caron, François

• Different Sized Metal Reinforcement Insertion System Using Cartridge Replacement Mechanism for 3D Concrete Printer

  Egawa, Ryo; Nezu, Shoichi; Nishijou, Keisuke; Ohno, Kazunori; Kojima, Shotaro; Okada, Yoshito; Asakawa, Tomoya; Kobayashi, Noriyuki; Nishiwaki, Tomoya; Kajita, Hideyuki; Miyazawa, Yuki; Tadokoro, Satoshi

• Cross-Layer Reinforcement Robot for 3D Printing Concrete : Hardware, Software, and Validation

  Zhao, Cong; Wang, Hailong; Sun, Xiaoyan

• Comparison between yield stress measurements for fiber-reinforced 3D concrete printing

  Zat, Tuani; Schmitt Duarte, Ester; Webber, Jaine; de Matos, Paulo R.; Rodríguez, Erich D.

• An Automated Pin Insertion Method for 3DCP and Its Reinforcement Effects on Beam Specimens

  Kobayashi, Noriyuki; Asakawa, Tomoya; Nishiwaki, Tomoya; Egawa, Ryo; Kojima, Shotaro; Okada, Yoshito; Ohno, Kazunori; Nishijou, Keisuke; Miyazawa, Yuki; Kajita, Hideyuki

• Powder-Bed 3D Printing of Cementitious Materials for Lightweight Construction Elements

  Hlaváček, Petr; Wolf, Christoph; Robens-Radermacher, Annika; Kühne, Hans-Carsten

• Hydration Characteristics of 3D Particle Bed Printed Cementitious Specimens

  Brunner, Kim; Tandon, Kai; Stengel, Thorsten

• Designing and Testing of Tailored Frequency Acoustic Panels

  Korat Bensa, Lidija; Serjun, Vesna Zalar; Hanzic, Lucija; Bohinc, Uros; Lucherini, Andrea; Rudolf, Rok

• 3D Printing by Selective Activation of Geopolymer-Based Binders

  Kondepudi, Kala; Gomzyakov, Albert; Liebscher, Marco; Mechtcherine, Viktor

• Sprayed Concrete Automation : A Unique and Complete Digital Fabrication Method

  Monfort, Maxime; Kim, Jongbeom; Schaeffer, Julien; Pastorelli, Florent; Germain, Thomas; Jolin, Marc

• Hygroscopic Insulation of Open Matrix Core Wall System As a Strategy to Enhance Buildability of 3D Printed Earth-Based Materials Structures

  Jacquet, Yohan; Perrot, Arnaud

• Additive manufacturing of alkali-activated materials by laser-induced slip casting

  Hlaváček, Petr; Kolsch, Nico; Zocca, Andrea; Kühne, Hans-Carsten; Günster, Jens

• 3D-printing with WAAM to form and stiffen lightweight steel panels for freeform façades

  Ojeda, Juan; Grebner, Philipp; Knaack, Ulrich; Rosendahl, Philipp L.

• Numerical study of concrete beams with 3D printed strain-hardening cementitious composites (SHCC)

  Qian, Shunzhi; Zhao, Huanyu; Meng, Dan

• Numerical Simulation of 3D Concrete Printing : From the Layer- to the Structural-Scale

  Daadouch, Koussay; Reinold, Janis; Meschke, Günther

• Numerical evaluation of thermal performance and improvement strategies for 3D printed concrete structures

  Dey, Dhrutiman; Panda, Biranchi

• Finite element model of 3D printed reinforcement for roads

  Koneswaran, Bahirathan; Rajeev, Pathmanathan; Sanjayan, Jay

• Effect of strain hardening material on seismic performance of 3D printed concrete wall: a numerical study

  Warsi, Syed Bustan Fatima; Panda, Biranchi; Biswas, Pankaj

• Development and Validation of Finite Element Constitutive Model for Meso-scale Compressive Fracture Behavior of 3D Printed Mortar

  Yoshihara, Rei; Hashimoto, Katsufumi; Sugiyama, Takafumi; Nakase, Kota

• Buildability Analysis of 3D Concrete Printing Using Finite Element Method

  Omar Osta, M.; Mukhtar, Faisal

• The Use of Additive Construction in All Structural Components of a Building

  Kreiger, Eric; Kreiger, Megan; MacAllister, Bruce; Wood, Tanner; Perez-Rivera, Anthony

• Steel Reinforced 3D Printing Concrete Housing Building and Its Modular Assembly Construction

  Sun, Xiaoyan; Lin, Xiqiang; He, Huanan; Yang, Hongyang; Wang, Hailong

• On-site ready-mix concrete 3D Printing with Karlos

  Nerella, Venkatesh Naidu; Degen, Robin; Frasch, Markus

• On Site Deployment of 3D Construction Printing for the Building a Two-story Building in China

  Lin, Xiqiang; Huo, Liang; Li, Guoyou; Wang, Hailong; Xia, Ming; Sun, Xiaoyan

• Is Additive Construction Ready for Seismic Regions? – A New Seismic Protective System Enabled by Additive Construction

  Mackin, Anthony; Migliorino, Jenna; Farhoud, Hamdy; Mantawy, Islam M.

• Green Klinkers : A Strategy to Include Plants in Double-Shell Masonry

  Wolf, Alexander; Bauer, Simon; Knaack, Ulrich

• Construction in the Modern Era

  De Rycke, Klaas; Bourriche, Meriem; Daffner, Tim

• Concrete 3D Printed Marine Wind, Solar and Energy Storage Support Structures

  Marchment, Taylor

• Cadenza. Casting UHPFRC stairs in 3D-printed formwork

  Chousou, Georgia; Yoo, Angela; Jipa, Andrei; Dillenburger, Benjamin

• Bridging Ancient Artistry and Modern Engineering : a 3D-Printed Concrete Arch Bridge Inspired by Millennium-Old Bronze Patterns Using an Integrated Concrete 3D Printing System

  Yang, Min; Yao, Xiaofei; Zhao, Liguo; Zhang, Yamei; Wang, Zuo; Wang, Xuejun; Ding, Xiaojun; Bai, Songlin; Liu, Shilong

• Additive manufacturing with Concrete : the Path to Practical Implementation

  Vasilic, Ksenija

• A Case Study in Industrialized 3D-printing : A One Hundred Home Community Near Austin, Texas

  Monkman, Sean; Ley Hernandez, Margarita; Galvez Moreno, Daniel

• 3D Printing Using Ultra High Performance Concrete

  Azizinamini, Atorod